Mystery solved for me. Thanks Dave.
Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: DAVID MASSEY <dave1massey at cs.com>
Sent: Thursday, May 31, 2018 5:39:33 AM
To: cliff_hansen at outlook.com; auprichard at uprichard.net; triumphs at
autox.team.net
Subject: Re: [TR] TR4 wiring question
The code for Brown is "N." The GB wire from the stabilizer is Green/Black.
The only Green/Brown wires are for the reverse lamps and the wire from the Turn
Signal Flasher to the Turn Signal Switch. All this is according to the
referenced diagram. Interesting that the wire from the stabilizer on the TR6
was changed to Light Green.
Dave Massey
-----Original Message-----
From: Cliff Hansen <cliff_hansen at outlook.com>
To: Andrew Uprichard <auprichard at uprichard.net>; triumphs <triumphs at
autox.team.net>
Sent: Wed, May 30, 2018 10:00 pm
Subject: Re: [TR] TR4 wiring question
The G/Brown could be the line from the stabilizer to the temp/fuel gauge.
Solid green carries power to the stabilizer, heater fan switch, reverse lights,
flasher, brake lights and wiper motor. The only one of those devices that is
behind the center of the dash is the heater fan switch. If that?s it, I?m
puzzled by the 3 tied together at that terminal.
Good wiring diagrams are here:
http://tr4a.weebly.com/uploads/2/1/9/8/21980360/tr2-4a_wiring_diagrams.pdf
I?ll take at look at my 4A tonight unless I see that someone has solved the
riddle.
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
Sent: Wednesday, May 30, 2018 1:27:16 PM
Subject: RE: [TR] TR4 wiring question
Don?t think so. I see those wires in the passenger footwell area. The ones I
am talking about come off the loom right next to the main center cluster. A
live feed to the heater makes sense. And I guess the green/brown could have
been a reverse light for later cars.
By the way, thank you to everyone who replied. Glad to see the list is alive
and well !!
Andrew
Sent: Wednesday, May 30, 2018 2:08 PM
Subject: RE: [TR] TR4 wiring question
Voltage stabilizer, mounted on the passenger footwell.
3 greens to the B post, G/Brown to the I post. Make sure the unit is grounded
to the body, the diagram shows a black wire at the E post to the ground.
Cliff
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
Sent: Wednesday, May 30, 2018 8:36:12 AM
Subject: [TR] TR4 wiring question
I am putting an early TR4 together and am in the process of wiring the car.
Just above the hoses coming into the heater and adjacent to the main center
cluster, there are 4 wires coming off the harness: three greens spliced
together and a green/brown.
Green/brown can be kinda ubiquitous, so I am not sure what it is for. A
back-up light maybe?
If anyone knows what these wires are for, can they let me know? Thanks!
Andrew Uprichard
Jackson, Michigan
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180531/a63ad94b/attachment.html>
|