Morning all
Just finishing up the process of putting the refreshed carbs back on the '3a.
All is going ok, except, the rear most piston get stuck in the dome when pushed
up. It gets stuck as well when the dome is off the carb body so it is not the
needle alignment. That appears to be good. It looks like the dome may have
been dropped and now a small ding in the near top side that has reflected
inside the dome and this is where the piston is getting stuck ( evidence of
minor scratches ).
What can I do?
Thanks
David
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180522/f6e7f79b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20180521_174821.jpg
Type: image/jpeg
Size: 4516187 bytes
Desc: 20180521_174821.jpg
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180522/f6e7f79b/attachment-0001.jpg>
|
