The part number is 132872. The Roadster Factory says no longer supplied. They
are 3/8 bolts with a shoulder. I use 3/8 dowel pins In the correct holes. There
are two 3/8 size holes in the bell housing, others are 5/16. If I remember
correctly, about 2 o'clock and 7 o'clock. I have plenty of the 3/8 dowel pins
if you can't find any thing.
Dean
Dean Tetterton
tr3a58 at verizon.net
-----Original Message-----
From: Sujit Roy <triumphstag at gmail.com>
To: Triumphs <triumphs at autox.team.net>
Sent: Fri, Mar 30, 2018 7:42 pm
Subject: [TR] Need help sourcing special gearbox to engine alignment bolts
The Stag has 2 special machined alignment bell housing bolts. I'm assuming the
TR6 and other Triumph used similar. Are these available anywhere?
Sujit
--
Sujit Roy
Cupertino, California
https://triumphstagblog.wordpress.com/
** triumphs at autox.team.net **
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/triumphs/attachments/20180330/5053515c/attachment.html>
|