triumphs
[Top] [All Lists]

Re: [TR] Stag Hollys

To: Glen Merrill <StagByTriumph@triumphstagclub.org>
Subject: Re: [TR] Stag Hollys
From: "Lee&John Howard" <leejohn7@gmail.com>
Date: Fri, 5 Feb 2016 09:00:30 -0800
Cc: triumph list list <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CAJaD1DPs43qGRMYee72ax7oaRJas0aNO0FKCdfkP41TPu-njiA@mail.gmail.com> <56A9A02C.7060801@triumphstagclub.org>
--===============3473775084477497117==

--001a1134f81a3cf72a052b08cc11

Success!
The engine is now purring at 700-800 RPM. At an East Coast mechanic's
suggestion, I closed down the Holley's secondary throttle plates. He said
that during idle the 1 1/2 turns of the secondary idle adjustment screw
will allow mixture through the secondary so that even with the primary idle
screw backed off completely a low idle is not possible. Anyway, worked for
me. I also bench checked all other adjustments, and also was careful to
tighten down all bolts to minimize vacuum loss.
So we're good to go....after fixing another leak in the cooling system, and
squaring away the clutch hydraulics and.....

Thank you all.

John Howard

On Wed, Jan 27, 2016 at 8:59 PM, Glenn A. Merrell - TSN <
StagByTriumph@triumphstagclub.org> wrote:

> John,
>
> Maybe check the timing?  Also a vacuum leak?  You should be able to close
> the throttle plates to make the engine die.  What is holding them open?
> Also check the choke plate, it should also fully open.
>
>
> --
> Glenn Merrell
> TSN Admin
> http://www.triumphstag.net
> mailto:StagByTriumph@triumphstagclub.org
>
>
>
>
> On 1/27/2016 5:51 PM, Lee&John Howard wrote:
>
>> My Stag is running, but I can't get the idle below 2000. Removed the carb
>> and checked settings and jest and all seemed OK. Timing is correct. Fuel
>> levels appear OK. Is it a jetting issue? Any ideas?
>>
>> Many thanks
>>
>> john Howard
>>
>
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/leejohn7@gmail.com
>

--001a1134f81a3cf72a052b08cc11
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div><div><div><div>Success!<br></div>The engine is now pu=
rring at 700-800 RPM. At an East Coast mechanic&#39;s suggestion, I closed =
down the Holley&#39;s secondary throttle plates. He said that during idle t=
he 1 1/2 turns of the secondary idle adjustment screw will allow mixture th=
rough the secondary so that even with the primary idle screw backed off com=
pletely a low idle is not possible. Anyway, worked for me. I also bench che=
cked all other adjustments, and also was careful to tighten down all bolts =
to minimize vacuum loss.<br></div>So we&#39;re good to go....after fixing a=
nother leak in the cooling system, and squaring away the clutch hydraulics =
and.....<br><br></div>Thank you all.<br><br></div>John Howard<br></div><div=
 class=3D"gmail_extra"><br><div class=3D"gmail_quote">On Wed, Jan 27, 2016 =
at 8:59 PM, Glenn A. Merrell - TSN <span dir=3D"ltr">&lt;<a href=3D"mailto:=
StagByTriumph@triumphstagclub.org" target=3D"_blank">StagByTriumph@triumphs=
tagclub.org</a>&gt;</span> wrote:<br><blockquote class=3D"gmail_quote" styl=
e=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">John,<b=
r>
<br>
Maybe check the timing?=C2=A0 Also a vacuum leak?=C2=A0 You should be able =
to close the throttle plates to make the engine die.=C2=A0 What is holding =
them open?<br>
Also check the choke plate, it should also fully open.<br>
<br>
<br>
-- <br>
Glenn Merrell<br>
TSN Admin<br>
<a href=3D"http://www.triumphstag.net"; rel=3D"noreferrer" target=3D"_blank"=
>http://www.triumphstag.net</a><br>
mailto:<a href=3D"mailto:StagByTriumph@triumphstagclub.org"; target=3D"_blan=
k">StagByTriumph@triumphstagclub.org</a><div><div class=3D"h5"><br>
<br>
<br>
<br>
On 1/27/2016 5:51 PM, Lee&amp;John Howard wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
x #ccc solid;padding-left:1ex">
My Stag is running, but I can&#39;t get the idle below 2000. Removed the ca=
rb and checked settings and jest and all seemed OK. Timing is correct. Fuel=
 levels appear OK. Is it a jetting issue? Any ideas?<br>
<br>
Many thanks<br>
<br>
john Howard<br>
</blockquote>
<br>
<br>
<br></div></div><span class=3D"">
** <a href=3D"mailto:triumphs@autox.team.net"; target=3D"_blank">triumphs@au=
tox.team.net</a> **<br>
<br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" target=3D=
"_blank">http://www.team.net/forums</a><br></span>
hs/leejohn7@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.te=
am.net/mailman/options/triumphs/leejohn7@gmail.com</a><br>
</blockquote></div><br></div>

--001a1134f81a3cf72a052b08cc11--

--===============3473775084477497117==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

--===============3473775084477497117==--

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TR] Stag Hollys, Lee&John Howard <=