Jets should have a diameter of 0.100" (between a #38 and a #39 drill).
Top of jet should be 0.125" below the bridge of the carb. I just
rebuilt my carbs on my 75 TR6, and these numbers came from Joe Curto.
I had B1AF needles - and my jets and needles were perfect.
Jeff Scarbrough
Corrosion Acres, Ga.
On Thu, Jul 23, 2015 at 4:40 PM, Ron L'Herault <lherault@verizon.net> wrote:
> One of the needles (front carb) has a lot of wear. I should replace the
> needle(s). Should I replace both? Should I replace the part the needles
> go into (jets?) There are no longer any tags on these carbs (not me- I
> don't usually open them up) but I want to get stock needles. Which should I
> get? TRF numbers are fine. They are my go to place.
>
> Thanks,
>
> Ron L
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|