triumphs
[Top] [All Lists]

Re: [TR] TR6 no start - update

To: Jeff Scarbrough <fishplate@gmail.com>, "Triumphs (triumphs@autox.team.net)" <triumphs@autox.team.net>
Subject: Re: [TR] TR6 no start - update
From: Bob Labuz <yellowtr@adelphia.net>
Date: Mon, 13 Jul 2015 09:05:50 -0400
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <CAO8Q7CNcsVKBeEfZ-ROkXqh8og=y5y45DCLqASatKQ9tG9mpOQ@mail.gmail.com> a=TGdWY25KQovz78N+ylr7Fw==:117 a=TGdWY25KQovz78N+ylr7Fw==:17 a=ayC55rCoAAAA:8 a=f8qcBMrUAAAA:8 a=4g2epv4a4k0A:10 a=N659UExz7-8A:10 a=3oc9M9_CAAAA:8 a=KMVqL87ouCajQd4GeiQA:9 a=pILNOxqGKmIA:10
User-agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
Jeff,

Did you try a new set of plugs? Last year, I had a sudden miss on my 72 
6 and I tried everything from points, to condenser, cap, rotor, wires 
and coil with no resolve. For some reason, I replaced the plugs with the 
originals that came with the engine and the miss went away. The original 
miss-fire was intermittent.

So I bead blasted the plugs that were in the engine when the miss 
started and refit. Same miss! So those plugs went in the trash and I put 
in a new set and haven't had any problem since. I then leaned up the 
mixture (Hitachi HS6), then checked the plugs after about 100 miles. 
Very clean.

I am convinced that it was not a rich mixture, but a defective plug or 2.

If I ever have a similar miss-fire, the plugs will be the first to test out.

Bob

On 07/12/2015 08:14 PM, Jeff Scarbrough wrote:
> On Sun, Jul 12, 2015 at 4:10 PM,  <FordneyNJ@aol.com> wrote:
>>
>> I had the same trouble several years ago on my TR 7. It was flooding. turns
>> out someone had installed gros jets.  Got rid of them and have had no
>> trouble since. Use a standard float valve, set the floats and you should be
>> good to go. Hope that solves it.
>
> I was wondering when someone would mention Grose jets... The car came
> with them, and other than cleaning them, they haven't given any hint
> of trouble in the last 8 or 9 years.  I checked them, and they shut
> off pressure when I blow through the fuel supply line.
>
> However, the problem I have is clearly fuel related, and likely too
> much of it.  I thoroughly checked the ignition system, and everything
> is spot on - all plugs sparking, etc. I did beadblast the plugs just
> for fun, but no improvement.  Compression is 130 all the way across -
> virtually no variation. When I pulled the plugs, some appeared
> slightly wet - but not all three plugs on either carb.  But it's an
> LBC, so who knows?
>
> I had carb rebuild kits on hand, and a heat shield, for a future
> maintenance project.  So, I guess I'm going to do the job a bit
> earlier than I planned.  We'll see what happens...
>
> And I haven't made up my mind about the jets yet.
>
> Jeff Scarbrough
> Corrosion Acres, Ga.
>
>


** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>