Why don't you phone or write Richard Good and ask. I've found him to be very
interested in helping.
JVV
-----Original Message-----
From: spamiam@comcast.net
Sent: Monday, April 6, 2015 4:12 PM
To: triumphs@autox.team.net
Subject: [TR] Goodparts TR4A-TR6 trailing arm bracket
What is the diameter of the Goodparts trailing arm bracket pivot bolt? And
is it the same as the stock bracket's pivot bolt?
I have another slightly uninformed question. When the trailing arm pivots
on the pivot bolt, what parts are supposed to move against each other? I
think it is supposed to be the bushing (in my case a poly bushing) rotating
against the sleeve. Is the sleeve supposed to be pinched between the ears
of the bracket, or against washers inside the bracket? IE are the IDs of
the washers supposed to be that of the bolt, or that of the OD of the
sleeve?
-Tony
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|