Re: [TR] transmission wisdom UPDATE

["Pete Ryner" <pryner@verizon.net>]

Thanks to all who replied.  I took the seal housing off of the input shaft 
and discovered my problem.  Had nothing to do with the bushing.  I didn't 
get the seal seated fully and the seal was pressing on the bearing housing 
causing the excessive resistance.  I removed the seal and assembled the 
housing and everything feels fine.  Replaced the seal and I'm happy with the 
feel now.
Pete 


** triumphs@autox.team.net **

Archive: http://www.team.net/archive