Mark, that sounds right to me. There is confusion stemming from the fact
that, for example, the early 2000 sedan gearboxes were basically TR4 units but
with a Vitesse (or Vitesse-like?) input shaft, which was smaller than that of
the TR. But GT6s and 2000s shared the same clutch bits, so....
--Andy Mace
Triumph 10 / Herald / Sports 6 vehicle consultant, The Vintage Triumph
Register: http://www.vtr.org
Check out the North American Triumph Sports 6
(Vitesse 6) and Triumph Herald Database: http://triumph-herald.us
-----Original Message-----
From: Mark J Bradakis <mark@bradakis.com>
Bud
wrote:
> Listerati,
>
> What is the diameter of a 10 spline input shaft on a
GT6 transmission? Is it
> the exact same size as a 10 spline TR6 transmission?
As I recall, one is 7/8", the other 1". I remember trying to mate a 1" gearbox
to a 7/8"
clutch disk late one night at Bailey's many years ago.
mjb.
**
triumphs@autox.team.net **
Archive:
http://autox.team.net/mailman/options/triumphs/zoboherald@aol.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|