triumphs
[Top] [All Lists]

Re: [TR] Moss Motors

To: Tim Purdy <timipurdy@citlink.net>
Subject: Re: [TR] Moss Motors
From: Darrell Walker <darrellw360@mac.com>
Date: Thu, 13 Nov 2014 17:00:41 -0800
Cc: TR List <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <AD94AC4D-8F94-484A-8F2C-684798152B39@citlink.net>
Hi Tim,

Ibve always had very good response from their customer service department
when missing items, or there was a mistake.  Ibd call back!

-Darrell

> On Nov 13, 2014, at 4:54 PM, Tim Purdy <timipurdy@citlink.net> wrote:
>
> Has anyone had trouble with Moss Motors customer service department? I have
> been a loyal customer for many years and spent, as we do on these cars, a
lot
> of money.
>
>            Anyhow, one of the o-rings on the carbs of the TR4 went out,
since
> gas leaked. Since with dual carbs, I ordered replacement o-rings, washers,
> etc. and order two sets, since might as well replace the other carb as
well,
> from Moss last week, Today tackled the carbs, but of the five items
related,
> four showed up as two and fifth as one.  Replaced the faulty o-rings on one
> carb, but could do no the other.  Called Moss customer service and after a
> long discussion, they told me if I place an order for additional parts,
they
> will not charge me for the missing o-ring. I tried to explain, I dont need
> anything else. Maybe I lost my common sense, you have dual carbs, and so
you
> order two of everything, to take care of both at the same time.
>            Should I try calling back tomorrow, and maybe someone will be a
> bit more  understanding?
>
> Tim, who would really like drive his TR4 '64
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/darrellw360@mac.com

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>