On the subject of brake light switches... this is the mechanical switch I
added on my other (non-TR) British car:
http://www.amazon.com/dp/B000E5DILY/ref=pe_385040_30332200_pe_309540_26725410_item
I left the hydraulic switch in place (which has not failed despite my using
DOT5) and added the above switch with a simple metal bracket in the
footwell operated by pedal arm movement. I had no problems with the
hydraulic switch but do like that the mechanical switch operates the brake
lights with only the slightest pedal movement - which may happen well in
advance of serious braking.
Looking at the TR3A pedal box I think that same switch might fit into the
hole in the front lip of the box to be actuated by the upper tip of the
pedal arm (very similar to a TR4 switch). Otherwise, an interior bracket
may be needed.
Yeah, I know the usuals carry mechanical switches but I have heard mixed
results with those (esp the white plastic version) whereas this metal
version has been used by quite a few LBC owners with success.
Geo
On Fri, Jun 13, 2014 at 4:37 PM, Randall <tr3driver@ca.rr.com> wrote:
> > Of course, this is assuming the switch is new, which is an absolute must!
>
> So, you have to replace the switch every time you use the brakes?
>
> I've used DOT 5 for several decades now, and I love it. The original
> brake light switch in my previous TR3A (which was converted in 1985 or so)
> lasted a long time, but eventually failed in just the manner described. It
> would still work if the pressure was high enough, but the pressure required
> kept getting higher and higher until even a fairly hard stop would not
> light the brake lights. Not a Good Thing.
>
> Several replacements from various sources (including a repro switch from
> Moss and a Ford replacement from FLAPS) went the same way in fairly short
> order (less than a year for each one, some in only a few weeks).
>
> Changing to a mechanical switch solved the problem permanently. Well,
> almost permanently. I did have one problem where the reservoir was leaking
> a tiny amount, and the fluif ran down the pedal and got into the switch ...
> causing a similar failure in a mechanical switch! The moral seems clear,
> DOT 5 and switch contacts do not get along! A post-mortem on the switch
> showed moisture along the shaft, which felt like DOT 5, and a hard black
> substance on the contacts, which I now believe to be silicon from burned
> DOT 5.
>
> But having been pushed into it, I do rather like having brake lights that
> come on _before_ braking starts, rather than after. With the mechanical
> switch, they come on as soon as I put my foot on the pedal, instead of
> waiting until the pedal has moved far enough to build pressure in the
> system.
>
> Randall
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|