I guess we will never know - but I was ticked to see the flat tabs.
So, grade 5 or grade 8 bolts when I put the NEW sprocket on the NEW cam to
go with the NEW tabs, NEW timing chain and NEW lifters ?
Andrew
-----Original Message-----
From: Tony Drews [mailto:tony@tonydrews.com]
Sent: Sunday, January 05, 2014 5:05 PM
To: Andrew Uprichard; 'Listers'
Subject: Re: [TR] TR6 lifters
If the bolts were properly tightened, and especially if loctite was used,
they wouldn't have come loose even if the tabs weren't bent over. I suspect
they got them semi-tight and then forgot to properly torque and secure them.
Tony
At 12:43 PM 1/5/2014, Andrew Uprichard wrote:
>No way that I am aware of. I just pulled the head on my 250 to get
>lifters out.
>
>The shop which built my TR250 (under 1000 miles ago) didn't bend the
>tabs over the two bolts which hold the cam sprocket in place: one came
>loose and then the other sheared off, causing the sprocket to come off,
>taking with it the nub at the end of the cam. So a new cam is in
>order. A silly little thing like a tab ends up costing a lot of money and
time........
>
>Andrew Uprichard
>
>-----Original Message-----
>From: triumphs-bounces@autox.team.net
>[mailto:triumphs-bounces@autox.team.net] On Behalf Of Peter Arakelian
>Sent: Sunday, January 05, 2014 11:55 AM
>To: Listers
>Subject: [TR] TR6 lifters
>
>Can TR6 lifters be pulled out without removing the head?
>
>Peter Arakelian - '71 TR6, Daily Driver
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/auprichard@uprichard.net
>
>** triumphs@autox.team.net **
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|