DanMasters Diagram
Brown From power to C1 (Control Box A1 or Amp Gauge)
Yellow/Purple From C2 to Overdrive Solenoid
White From Power Side of Starter Switch to W1
Yellow/Green From W2 to Overdrive Switch
Yellow From Overdrive Switch to Isolator Switches (in
parallel)
Black From Isolater Switches (in parallel) to Ground
Mine
Brown From power to C1 (Control Box A1 to Secondary Fuse
Box to C1)
Yellow/purple From C2 to overdrive solenoid
White From power side of key switch to inline fuse to
overdrive switch
Yellow/Green From Overdrive Switch to W1
Yellow From W2 to Isolater Switches in parellel
Black From Isolater Switches (in parallel) to Ground
The difference between the two is that I put the switch between the power
and the relay. Since the relay is mounted on the dash support bar, this
eliminated long runs of white to the relay, Yellow/green to switch, and
yellow to relay. There is only one long run of yellow/green from the
switch to the relay
Carl
1960 Triumph TR3A - TS81802LO
Tampa, FL
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of ronnie babbitt
Sent: Friday, December 06, 2013 9:39 PM
To: triumphs2 TRlist
Subject: [TR] OD wiring A-type TR3A
Here is what I have
Wires
Yellow/Green
Yellow/purple
Brown
White
I have 2 different relays both say they are 6RA the original looking one has
double C1
single C2
single W1
the newer 6RA relay has the same configuration but one addition terminal it
looks like it is labeled WC
can someone tell me which wires goes to the correct terminals
ronnie
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|