triumphs
[Top] [All Lists]

Re: [TR] New tool.

To: tom white <tswhitez123@hotmail.com>
Subject: Re: [TR] New tool.
From: WBEECH <wbeech@flash.net>
Date: Mon, 14 Oct 2013 18:29:29 -0500
Cc: "triumphs@autox.team.net" <triumphs@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <BLU180-W3A688E06DCD96808CAA7DE51A0@phx.gbl>
Tom,
I'll have to try that, pretty clever.   I have the same challenges, tight
tonneau and old hands.  This draws from my old brake spring tool to slide the
springs into place.

Thx,
Bill

Sent from my iPhone

> On Oct 14, 2013, at 6:10 PM, tom white <tswhitez123@hotmail.com> wrote:
>
> If you have lift the dot snaps that are really difficult to snap over their
> posts you may like this.
>
> I am fitting a new tonneau to my TR3A.  I am fitting it fairly tight as it
is
> not as generous with material as the last one.  Added to the difference in
> size is the fact that my my hands and forearms do not have the strength
they
> had a few years ago.
>
> So with necessity as the mother of invention I made a tool to help with the
> difficult lift the dot snaps.  I took a length of 3/16 steel brake/fuel
line
> and bent loops in one end to make a handle witha 8" - 10" shaft protruding
> from the center of the handle.  Then I ground away half of the tube for the
> first half inch of the shaft.  This leaves a half inch concave area at the
end
> of the shaft.
>
> To use the tool I push the shaft through the lift the dot snap that is
> difficult to position.  I place the concave end of the shaft on the post I
> want the snap to attach to.  Then I gently move the handle of the tool in
the
> direction of the post. The lift the dot snap will move down the shaft as it
> moves closer to the post.   When I can see the top of the post through the
> hole in the snap I press hard on the snap and withdraw the tool.  The snap
> then seats on  and engages the post.
>
> Best regards,
> Tom
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>