Jim --
I don't think it matters on those. In fact I believe they are holed (for
the single oil passage) in two corners so they are not 'handed'.
Also, I have been known to reuse a head gasket when the gasket itself was
not the reason for the tear-down -- but I suppose that is not recommended.
In that case I put it back on with the same orientation as before.
Geo
On Mon, Sep 2, 2013 at 12:18 AM, Jim Vassiliadis <jimstr4@gmail.com> wrote:
> I just finished torquing down my TR4 head and think I've put the head
> gasket
> upside down.
> Its a composite copper asbestos looking one with no top marking.
> So after googling I thought that the smooth side should go againt the head
> and the side with the copper folded over around the chambers against the
> liners.
> then it occurred to me that I vaguely remember one of Randals photos with
> them the other way around.
> Does anyone know?
> If I have I understand that those type of head gaskets are oncers?
>
> Jim and the the TR4 thats being slowly reassembled
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/ahwahneetr@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|