triumphs
[Top] [All Lists]

Re: [TR] TR3 Tonneau Cover

To: triumphs@autox.team.net
Subject: Re: [TR] TR3 Tonneau Cover
From: Dave Massey <dave1massey@cs.com>
Date: Sun, 18 Aug 2013 19:42:03 -0400 (EDT)
Delivered-to: mharc@autox.team.net
Delivered-to: triumphs@autox.team.net
References: <8D06A3D83C2275B-FE0-4D6AD@webmail-vd011.sysops.aol.com> <3D92D047-3748-4C75-BA96-22288854AADC@flash.net>
Since the snaps are sent uninstalled I wonder why there would be a separate
listing for that.  But that is not my issue.  My problem is that the front to
back length is about a half inch short (I have not checked the R\L fit).  I
didn't think they changed that dimension during the years but we all know the
definition of assume.





Dave Massey






-----Original Message-----
From: WBEECH <wbeech@flash.net>
To: Dave Massey <dave1massey@cs.com>
Cc: triumphs <triumphs@autox.team.net>
Sent: Sun, Aug 18, 2013 10:28 am
Subject: Re: [TR] TR3 Tonneau Cover


The placement of the first LTD peg behind the door changed at the noted Comm
number.

I found I needed to leave mine out in the sun for a couple of hours in order
to
soften it up and stretch it into place.

Bill

Sent from my iPhone

On Aug 18, 2013, at 10:19 AM, Dave Massey <dave1massey@cs.com> wrote:

> So, I bought this tonneau cover for the TR3 and no matter how I try to
stretch
> it out it comes up a good half inch too short.  I see that there are two
> models listed in the Moss catalog and perhaps I got the wrong one.  Does
> anyone know the difference between the two?
>
> TIA
>
>
> Dave Massey
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>