I have an alternator with the narrow pulley conversion and the belt supplied
would not fit.
I ended up with a belt from NAPA, PART NUMBER 25-7385.
This cross references to a Dayco 15385 or a Gates 7385.
The belt is 13/32" wide and 39 1/8" long.
Rod
On May 27, 2013, at 4:30 AM, John Wise <tr3a.60@gmail.com> wrote:
> I could not get the belt suggested by my last inquiry at my friendly local
> auto parts store. So I ordered the best belt offered by Moss (Flennor
> 20x0900LI) to replace the failed belt on my alternator equipped 1960 TR3A.
It
> does not come close in length, even when prying it as suggested in their
> instructions. It was probably intended for the much narrower generator.
I
> forgot that difference in width would limit the amount it could be
adjusted.
> Duh
>
> Does anyone have any other suggestions for a pulley belt that will fit a
TR3A
> with an alternator?
>
> Thanks
>
> John
>
> John Wise
> Ormond Beach, FL
>
> 1960 TR3A
> http://wisegroupllc.org/_/TR3A.html
>
> 1977 Porsche 911S ('86 3.2 engine)
> http://wisegroupllc.org/_/Porsche.html
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/rgt2@sbcglobal.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|