I secured mine using short pieces of rubber tubing - the sort with a tiny
I.D. and a thick wall, may be called vacuum hose.
Most of the letters can be held with one length of tubing (about an inch
long) bent into a U and fit over both pegs. Some letters/locations worked
better with a pair of 1/4" lengths over the pegs.
The advantage of this method is that the letters can be quicly removed for
polishing and waxing the area. The front badges are affixed in the usual
manner (would be hard to get to to undo and anyway are easier to wax
around).
Have never had one come loose yet.
Geo
On Mon, Jan 21, 2013 at 2:43 PM, Angelo Graham <agraham@execulink.com>wrote:
> Hello List:
> Wondering what techniques listers have used to fasten the badges (&
> letters) to the front clip and rear deck (TR2).
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|