Gary,
Could it be the sender in the tank? I think you can check it with an
ohm meter.
But Randall will give a more complete reponse as usual.
Doug
On 11/10/2012 8:28 PM, Gary Nafziger wrote:
> Am presently trouble shooting 59 tr-3 fuel guage not working. I get no
> response from needle at all with my original 3 guage.
>
>
> I had a tr-4 guage
> which I installed instead and found that it DID work, but only goes to full
> and stays there when switch is on, whether tank is full or not. It does fall
> to empty when switch is off and also falls to empty when green/black wire at
> sender is grounded on tank ground nut.
>
> Randall mentioned in a recent post
> that the 3 and 4 guages work opposite. Is there a way to make my 4 guage work
> in my 3?
>
> thanks
>
> gary n.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/mathews@uga.edu
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|