I replaced the clutch master cylinder in my 1962 TR4 and I do not recall any
problems. I certainly did not remove the pedal box or mess with the pedal
mounting. Maybe it's a good thing I didn't look at the manual. I just
proceded in what seemed like an obvious manner.
Phil Ethier West Side Saint Paul Minnesota USA
1973 Triumph Stag LE22439UBW "uncle jack", Sapphire Blue
2004 Suburban 8.1, Sport Red, the only automatic of the bunch
2005 Lotus Elise, Bordeaux Red Pearl
2007 Saturn Ion 3 2.4, Berry Red
pethier@comcast.net
http://www.flickr.com/photos/pethier
http://www.flickr.com/groups/triumphtransamerica
http://www.mnautox.com
http://www.mntriumphs.org
----- Original Message -----
> From: dmericas@austin.rr.com
> To: triumphs@autox.team.net
> Sent: Friday, November 2, 2012 9:15:16 AM
> Subject: [TR] Replacing clutch master in a TR4
> I need to replace the clutch MC in my TR4. I seem to recall doing this
> job long ago without taking out the pedal box as the shop manual
> suggests is required.
>
> Can anyone comment on how hard it is to replace the MC without
> removing the brake MC and pedal assembly?
>
> Thanks.
>
> Dean
> 1965 TR4
> 1976 AR 2000 GTV
> 1976 AR Giulia Nuova Super 2L
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/pethier@comcast.net
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|