Re: [TR] Electric Fan wiring

[Dave1massey@cs.com]

OK, I was confused there for a while.  The ring terminals with the crosses 
looked to be positive electrical connections.  Maybe they are and if this is 
a positive ground vehicle it should work just fine.  But on second thought 
these look like they might be Philips head screws and as every concours 
judge will tell you Philips head screws are incorrect for a TR3.  Seriously, if 
these are connections to chassis everything is correct with the exception of 
the ground connection for the fan which is not shown.  But let's assume you 
know better than to leave this detail unattended.

Note: this configuration will run the fan even with the key off so be 
careful not to leave the car unattended in the ON mode.  Your battery will 
thank 
you for that.

Dave

In a message dated 10/5/2012 12:32:42 AM Central Daylight Time, 
cfmtr3a@verizon.net writes: 
> I am adding a pusher fan on my TR3 and wanting to confirm my wiring 
> 'plan'.
> 
> See:
> http://i1001.photobucket.com/albums/af136/cfmtr3a/Information%20Items/Elect
> r
> icFanCircuit.jpg 
> 
> Do I have it right?

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net