Re: [TR] Rocker Arm

[Randall <tr3driver@ca.rr.com>]

Any chance you are thinking of:

Rocker Arm Specialist
19841 Hirsch Court
Anderson, CA 96007
Tel (530) 378-1075
(800)747-2767
fax (530) 378-1177
mailto:rocker@c-zone.net
http://www.rockerarms.com/index.htm

It has been a few years now, but I was very pleased with the work they did on 
my TR3A rocker shaft.  The cost was modest as well, roughly the same I would 
have paid for just the parts.  All new adjusters, locknuts, springs, bushings 
and the shaft itself.  The rockers I'm not certain about, they certainly looked 
new.  Only the pedestals, end caps and locking screw were clearly the original 
parts.  (They had been nicely cleaned up, but not remachined or anything.)

I've lost track of how many miles I've got on that rocker shaft; the only issue 
I have ever had is that the roll pin they used on the rear cap started to work 
it's way out (which I discovered when I moved it from the wrecked 3A to the 
current TR3).  I replaced it with a stock solid pin and all seems to be well.

Randall

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net