Re: [TR] Adding a VSS pulse generator inline with speedometer cable

[Brad Kahler <bkahler1@gmail.com>]

Well a bunch of you have suggested/recommended the magnets on the drive
shaft option.  I did find a magnet setup that was about $20 cheaper than
Amazon  http://www.summitracing.com/parts/RPC-250-4165/?rtype=10

I will check out Susquehanna Motorsports as suggested by Phil.

I'm going to search a little while longer trying to find someone that will
modify a speedometer cable to work with a pulse generator but at least I
have a fall back option that is not all that expensive.

Thanks!

Brad

On Tue, Aug 14, 2012 at 4:32 PM, Lee Daniels <lee@automate-it.com> wrote:

> Speaking of Voila!, here's
>
>   http://amzn.com/B0009GVUG8
> Magnetic VSS Speed Pulse Generator Kit for Rostra and Audiovox Cruise
> Control
>
> also see them on ebay.
>
>
> > Or, as an alternative I remember adding cruise to an old truck, they
> sent me
> two magnets and roll of tape.  Strap one to the driveshaft and the other
> mounted on a bracket in close proximity.  Voila! Le pulse generator.  Drove
> that old truck for 20 years.
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/bkahler1@gmail.com

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net