Re: [TR] Adding a VSS pulse generator inline with speedometer cable

[Wbeech <wbeech@flash.net>]

Or, as an alternative I remember adding cruise to an old truck, they sent me
two magnets and roll of tape.  Strap one to the driveshaft and the other
mounted on a bracket in close proximity.  Voila! Le pulse generator.  Drove
that old truck for 20 years.

Have you tried West Valley Instruments in SoCal or ZepCo in Dallas?

Sent from mobile Bill

On Aug 14, 2012, at 2:50 PM, Brad Kahler <bkahler1@gmail.com> wrote:

> The subject line pretty much describes what I need to do.  I've checked
> with some speedometer shops and either I get someone I can't understand or
> they don't understand what I'm looking for.
>
> What I need is to add one of the VSS signal generators in line with my
> speedometer cable so I can finish the installation of the cruise control on
> my TR4.  The only signal generator I can find has the typical GM style 7/8
> male thread at one end with a 5/8" (I think) male thread on the other end.
>
> I don't mind sending the speedometer cable and adapter some place to have
> it fitted.
>
> Any suggestions?
>
> Thanks,
>
> Brad
> 1963 TR4
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech@flash.net

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/triumphs-archive@autox.team.net