[TR] SU HS-6 needles

["Dave Connitt" <dconnitt@fuse.net>]

Hi List,
Well, with the help of Bill Beech and Micheal Marr I was able to fix my SU
HS-6 problem with the front carb needle not dropping down all the way.  I just
had to center the jet and all is well. Next problem is how to remove some of
the slack in the throttle linkage were the bell crank between the carbs
converts the front/back motion to up/down. Kinda sloppy..
Thanks again!
Dave Connitt

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net