Subject: | [TR] TR2 distributor metal shavings resolved |
---|---|
From: | ccsimonsen at gmail.com (Chris Simo) |
Date: | Wed, 23 May 2012 10:42:22 -0400 |
Looks like there are still a few of those bad rotors out there. Yep - the rotor is missing a rivet and I imagine it was machined up quite nicely by the whirling bits under the point plate. Tore it down completely, cleaned it up and gave it a good lube before reassembly. There were a ton of filings in there as the distributor housing is softer than the rivet and it took a beating. All is good and running well. With all the shavings that were around the points - I'm amazed the car still ran. Chris |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TR] Brain Freeze?, Foster, Stan (HP IT) |
---|---|
Next by Date: | [TR] TR2 distributor metal shavings resolved, Chris Simo |
Previous by Thread: | [TR] Brain Freeze?, Alex |
Next by Thread: | [TR] TR2 distributor metal shavings resolved, Chris Simo |
Indexes: | [Date] [Thread] [Top] [All Lists] |