i did not know of auto-sparks when i bought my harness from British wire.
i
knew i was going to be using an electric fan so i had them run an additional
wire inside the harness from the fuse box to the front of drivers side fender.
i was extremely happy with what i got and the price was right too.
in
comparison to my buddy who bought from one of the 3, who could still not get
it right for his car after 2 returns.
Frank Fisher
From: Randy and Valerie
DeRuiter <deruiterville at hotmail.com>
To: dconnitt at fuse.net; Triumph List
<triumphs at autox.team.net>
Sent: Thursday, May 17, 2012 6:48 AM
Subject: Re:
[TR] Non-OEM wire harnesses
I've not done this personally, but Auto-sparks do
custom work as well, so if
you wanted to add extra wiring to the loom for an
alternator, relays etc, as
long as you plan it out they can accomodate you.
Nothing against Advanced
Autowire, but I find it hard to justify over $500
when a stock setup can be
had in the UK for about $200.
> From:
dconnitt at fuse.net
> To: triumphs at autox.team.net
> Date: Wed, 16 May 2012
19:31:43 -0400
> Subject: [TR] Non-OEM wire harnesses
>
> Hi,
> I am slowly
getting to the point of wiring up my TR4A IRS and was planning
on
> using a
Advanced Autowire harness. Unfortunately for me, the cost for their
> harness
is now $520.00. I understand it is a good quality harness but
$520.00
> is a
bit out of my price range.
> I am asking if anyone has had any experience good
or bad installing any
other
> non-OEM wire harness, hopefully in a TR4A.
>
Thanks,
> Dave Connitt
>
> ** triumphs at autox.team.net **
>
> Donate:
http://www.team.net/donate.html
> Archive: http://www.team.net/archive
>
Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/deruiterville at hotmail.com
**
triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3 at yahoo.com
|