Re: [TR] TR4 Fan Balancing

["Randall" <TR3driver@ca.rr.com>]

> I am removing my eight blade fan and returning to the 
> original four blade
> metal one. The metal one had been sitting in the bin for 10 
> years, so I
> bought the fan mounting kit and discovered the balancing 
> piece. How is it
> used? How do I know if I need it? 

You'll need a balancing jig, to balance the fan/hub/pulley assembly.  HF
sells one for balancing motorcycle tires (but the one I got had a stiff
bearing that had to be replaced).

Instructions are in the TR3 workshop manual, page C9.
http://tinyurl.com/83x4e45

After all that, mine seemed to be adequately balanced without any weights.
But it still didn't cool enough in prolonged stop-and-go traffic, so I
eventually installed an electric fan instead.

-- Randall  

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mharc@autox.team.net