What are the symptoms of the bad synchro rings?
Jonas Payne
PBR
Cell: (702) 358-5084
-----Original Message-----
From: triumphs-bounces at autox.team.net [mailto:triumphs-bounces at
autox.team.net]
On Behalf Of Randall
Sent: Tuesday, April 24, 2012 12:05 PM
To: triumphs at autox.team.net
Subject: Re: [TR] TR3 Transmission shifting block
> During the re-build everything looked real good and all we did was
> replace the syncros and found one detent spring & ball missing.
So all the interlock bits (two balls and a pin) are in place?
Did you measure the force to move the shift rings on the hubs?
Any chance you got some of the bad synchro rings that were making the rounds a
few years ago?
What are you using for lube? Might be worth trying some MT-90 if you aren't
already, as it seems to really improve shift action.
-- Randall
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jpayne at thorcon.net
|