[TR] manifold studs

[TR3driver at ca.rr.com (Randall)]

> what is the recommended torque settings for the nuts that 
> attach to the
> manifold studs for an early tr4?

My book says 22-24 ft lb, which seems about right (tho I never bother using
a torque wrench).  More important, IMO, is to use new lock washers and check
the nuts for tightness occasionally.

On my TR3A, I also found that it helped to use a heavy flat washer on the
front & rear stud (the ones without the cast iron bridge pieces).

-- Randall