me too.
Frank
________________________________
From: Randy and Valerie
DeRuiter <deruiterville@hotmail.com>
To: oldpine47@frontiernet.net; Triumph
List <triumphs@autox.team.net>
Sent: Wednesday, February 15, 2012 8:39 AM
Subject: Re: [TR] rear brake shoes
Fred-
You happen to have 10" drums? If
so the same thing happened to me, but the
interference was not huge - I used
some emory cloth to remove some of the
material to get everything to fit.
This worked mainly because the amount I
needed to remove was relatively small
- hopefully you have a similar
situation.
Randy
64 TR3, 59 TR3A
> From:
Oldpine47@Frontiernet.net
> To: triumphs@autox.team.net
> Date: Wed, 15 Feb
2012 11:29:31 -0500
> Subject: [TR] rear brake shoes
>
> Just got a new set of
rear shoes for my TR3A and there is no way to get the
> drum back on the hub.
Anyone else have this problem. Is it possible that I
> have to grind some off
the end of the shoes to reduce their diameter?
>
> TIA
> Fred
>
> **
triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/deruiterville@hotmail.com
**
triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
** triumphs@autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|