triumphs
[Top] [All Lists]

Re: [TR] Rivnut Tool

To: "Don Hiscock" <don.hiscock@gmail.com>, "John Macartney"
Subject: Re: [TR] Rivnut Tool
From: "Michael Marr" <mmarr@notwires.com>
Date: Sun, 5 Feb 2012 10:41:42 -0600
If I could get to both sides of the work I would not be looking to use 
rivnuts!

Mike

-----Original Message----- 
From: Don Hiscock
Sent: Sunday, February 05, 2012 9:31 AM
To: John Macartney
Cc: triumphs@autox.team.net
Subject: Re: [TR] Rivnut Tool

x2 on John's comments.  Rivnuts are perfect for blind applications.
When one can get to both sides of the work, why bother?

Don
1962 TR3B TSF202L

On 2/5/12, John Macartney <flywheelcoventry1@yahoo.co.uk> wrote:
> Certainly the Rivnut tool is one way, albeit costly. What's wrong with
> simple
> zinc plated nuts and bolts and two shakeproof washers - or am I just being 
> a
> cheapskate? Probably.
>
> Jonmac
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/triumphs/mmarr@notwires.com 

** triumphs@autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>