triumphs
[Top] [All Lists]

[TR] Transmission re-build/service

Subject: [TR] Transmission re-build/service
From: Dave1massey at cs.com (Dave1massey at cs.com)
Date: Mon, 14 Nov 2011 07:20:37 -0500 (EST)
In a message dated 11/13/2011 7:46:24 PM Central Standard Time, 
TR3driver at ca.rr.com writes: 
> >about the only 'problem' 
> >I seem to have
> >is downshifting from 4th to 3rd while at speed,
> 
> Could be a worn synchro, but it's unusual (in my limited experience) for 
> the
> 4th gear synchro to wear out first.  I would also check the force required
> to move the shift ring on the hub (which is how much force gets applied to
> the synchro ring during shifting), and for wear in the cone on the input
> shaft (where the friction surface of the synchro ring rides).
> 

Which is what happened to my TR3 transmission.  But it happened so quickly 
I think there was something caught in the ring causing it to drag and 
overheat. Probably a silicone dingleberry as the PO used a lot of silicone 
gasket 
sealer on it.  That is what precipitated the transmission rebuild and 
subsequently the frame-off restoration.

I think I need counseling.

But a 4th to 3rd downshift problem wouldn't be a fourth gear synchro but a 
third gear synchro failure.

Dave

<Prev in Thread] Current Thread [Next in Thread>