triumphs
[Top] [All Lists]

[TR] What's a reasonable price for doing a TR6 clutch?

Subject: [TR] What's a reasonable price for doing a TR6 clutch?
From: lgmtr6 at yahoo.com (lgmtr6)
Date: Mon, 1 Aug 2011 18:21:09 +0000
References: <20110801121846.08E36187888@autox.team.net> <8CE1E725CA66EFF-12D8-1588A@webmail-m044.sysops.aol.com><66BEC8351EF94131B72E2F3ECBBF1D52@BobPC>
Thanks to all who responded. Here in Fla. the shop rate is about $85 per hour X 
6 hours is about $510 plus the clutch kit at around $300. So $810 plus tax and 
any surprises. 
Larry Miceli
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: "Bob Danielson" <75tr6 at tr6.danielsonfamily.org>
Date: Mon, 1 Aug 2011 11:33:00 
To: <lgmtr6 at yahoo.com>; <triumphs at autox.team.net>; Andrew S. 
Mace<zoboherald at aol.com>
Subject: Re: [TR] What's a reasonable price for doing a TR6 clutch?

Andy.........where did you find the Repair Time Schedule? Sounds like a 
great resource or interesting reading.....

Larry..........you can save about 2 - 3 hours of shop labor if they'll let 
you pull/reinstall the interior yourself. Pretty easy to do but time 
consuming. The great unknown with our cars is how easily they come apart 
unless you've taken them apart already. Frozen/stripped bolts are 
commonplace and that adds to the time factor. Some guys can pull the tranny 
without dropping the exhaust but my exhaust comes apart easily so I always 
drop it....... the rear tranny mount is tough to get at with the exhaust in 
place.

Pulling the tranny usually turns into a "while I'm in there I might as well" 
scenario...........i.e. new clutch, new t/o bearing, pin the clutch fork, 
resurface & balance flywheel, new tranny seals etc.

Bob


Bob Danielson
http://tr6.danielsonfamily.org
1975 TR6 with:
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs



-----Original Message----- 
From: Andrew S. Mace
Sent: Monday, August 01, 2011 10:56 AM
To: lgmtr6 at yahoo.com ; triumphs at autox.team.net
Subject: Re: [TR] What's a reasonable price for doing a TR6 clutch?

If it helps at all, my Triumph "Repair Time Schedule" shows 6.3 hours for
""Clutch assembly and/or plate. Replace" -- same for TR4A, TR5PI and TR6PI
(those are the relevant sections in my copy)!



--Andy Mace


-----Original Message-----
From: lgmtr6 <lgmtr6 at yahoo.com>
To: Triumph Mailing List <triumphs at autox.team.net>
Sent: Mon, Aug 1, 2011 8:18 am
Subject: [TR] What's a reasonable price for doing a TR6 clutch?


Just trying to get a ballpark figure for a clutch replacement on a TR6?
Thanks
Larry Miceli
Mount Dora, Fla
74 TR6.
73 Stag
58 TR3
Sent from my Verizon Wireless BlackBerry

<Prev in Thread] Current Thread [Next in Thread>