Thanks for the replies. It looked like that was the case but the aperture for
filling the front chamber looks way too small to easily get fluid into. Not
the
best of designs.
----- Original Message ----
From: Bob Danielson
<75tr6 at tr6.danielsonfamily.org>
To: Alex Cherington
<a_flying_scotsman at yahoo.com>; triumphs at autox.team.net
Sent: Sat, 16 July,
2011 13:23:41
Subject: Re: [TR] TR6 Brake Bleeding
The fluid goes into both
chambers. The small front one is for the rear brakes
and the large rear one
is for the front brakes. Bleed them in order of distance:
RR, LR, RF, LF
Bob
Bob Danielson
http://tr6.danielsonfamily.org
1975 TR6 with:
Throttle Body
Injection
Toyota 5 Speed
Nissan Diff & CVJs
-----Original Message----- From:
Alex Cherington
Sent: Saturday, July 16, 2011 7:49 AM
To:
triumphs at autox.team.net
Subject: [TR] TR6 Brake Bleeding
My car is an ex US
LHD May 1976 model. I have replaced my front pipes and
calipers and want to
bleed the brakes. With the cap off there appears to be 2
chambers as there is
a piece of plastic across the reservoir.
So does fluid
go into the larger
chamber or does fluid go in to the very small
opening at
the front too???
I
am more used to the single system master cylinder as on
my Mk3 Spitfire.
Thanks
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/75tr6 at tr6.danielsonfamily.org
|