I sent this earlier but for some reason I cant change from html format through
Verizon directly. Sorry.
C
From: Carl TR [mailto:cfmtr3a@verizon.net]
Sent: Wednesday, July 27, 2011 12:23 PM
To: JGILLIS@tcd.ie; triumphs@autox.team.net
Subject: Re: [TR] Head studs Q
According to the S/T Parts - pg 1.
stud lengths changed at 13052E although it looks like the head changed at
9350E.
from:
6 x 106959 = 5"
4 x 106960 = 9"
2 x 113570 = 5 3/8"
1 x 121734 = 5 9/16"
to:
3 x 106959 = 5"
2 x 106960 = 9"
2 x 113169 = 9 1/2"
5 x 113570 = 5 3/8"
1 x 121734 = 5 9/16"
TRF has all listed with a price - that does not guarantee that they are in
stock
Moss-UK does as well but does not show the 6/4/2/1 configuration in their
diagram - only the later configuration.
Could it be that the lengths were increased for a particular reason?
On 07/27/11, John Gillis<JGILLIS@tcd.ie> wrote:
Are the head studs for the low port head on my TR2 the same length for the
later TR3 head? I am still looking for a source for reasonably priced set of
studs and also wondering if the ARP are the only way to go
Regards
John last of the long doors
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|