My TS76120L was "prepunched", too. I cut the vinyl to mount the O/D switch
when I installed it in the original dash.
Tom
----- Original Message -----
From: "Randall" <TR3driver@ca.rr.com>
To: "'George'" <geomurphy@windstream.net>; <triumphs@autox.team.net>
Sent: Friday, July 01, 2011 7:45 PM
Subject: Re: [TR] Tr3 Dash Switches?
> In case you are wondering George, the factory always punched the holes in
> the sheet metal. If the heater and/or OD were not fitted, they just left
> the
> holes covered with vinyl.
>
> At least that was true for the earlier cars with vinyl glued to the dash.
> I
> don't know about the later ones (post 60K TR3A/B).
>
> -- Randall
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|