triumphs
[Top] [All Lists]

Re: [TR] TR3 tight steering and decals

To: John Herrera <jrherrera90@hotmail.com>
Subject: Re: [TR] TR3 tight steering and decals
From: Frank Fisher <yellowtr3@yahoo.com>
Date: Thu, 23 Jun 2011 10:46:09 -0700 (PDT)
ah ha
yes it is a 2 piece column

 



________________________________
From:
John Herrera <jrherrera90@hotmail.com>
To: yellowtr3@yahoo.com;
ahwahneetr@gmail.com
Cc: Triumph List <triumphs@autox.team.net>
Sent: Thu,
June 23, 2011 10:31:57 AM
Subject: RE: [TR] TR3 tight steering and decals


>
done the lock screw on top of the box thing.
> it is certainly "stiffer" than
my
> TR3, my buddy Paul's TR3 and the TR3 that i 
> drove belonging to a club
member.
> it does not even show any signs of straighting out from a turn. if
fact its a
> good pull to get it straight.
> its way too stiff

Frank, is it a
two-piece column?
 
If so, the two pieces must align with each other exactly
or the steering will be 
quite stiff.
 
There are adjustments on both the unit
mount and the upper shaft for doing this. 
Kinda fiddly, but necessary.
 
I
put the coupler on one side and pull the upper column out, the slide it into
the coupler as I watch. If the coupler moves, I adjust and try again.
 
And
again. Until the coupler is stationary when the shaft slides in. 
 
John H.


triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>