In a message dated 6/13/2011 2:38:04 PM Central Daylight Time,
cfmtr3a@verizon.net writes:
> Ok - how does one stretch and/or notch the dash vinyl on the TR3 to fit
> the cubby box opening. Ruined the first attempt - it tore beyond the
> visible area.
>
> In my opinion there is no way that it can be heated enough to cover the
> inside corners, the curve of the inside of the door and roll-over to the
> backside of that metal.
>
My vinyl stretched just fine without heat. I cut flutes in the areas that
wrap around the backside which helped and I used lots of contact adhesive
and clamps. That was pretty straight forward.
I'm just glad it isn't leather.
Dave
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|