Smack it with a hammer and then use a screw driver to work it up onto the
tool. You will probably have to chuck the tool in a vice to pull it off of
the shaft with the snap ring on the tool. You won't hurt the tool. I
have done it several times.
Sam Clark
Green Country Triumphs
So what's the trick to removal of the 3rd gear snap ring off of the main
shaft? I have always used multiple screwdrivers in the past but I
now have the Churchill tool for doing it. Smack it with a hammer and
drive it under the snap ring? Put it in a press and push it under? I've
never used one before and don't want to break anything in the process
(especially the tool :-).
Mike
TS11544L
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|