> The overdrive sun gear thrust washer was in pieces
Just as a side note, that seems to be a common failure. Can't prove it, but
I strongly suspect it comes from too much end float in the OD. The early
books give the desired range as .014" - .020", but the later ones reduce
that to .008" - .014". On my OD it was closer to .050" !
Never tried Bob's bushings, but the approach seems sound.
-- Randall
triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|