> The switch I have is the same as:
> http://s1001.photobucket.com/albums/af136/cfmtr3a/Information%
> 20Items/?actio
> n=view¤t=TR4a_2-speed_pull-pull-push_switch.jpg
> >From top down / back to front; Terminals are 1 4 6 7 8
Sure, that will work (assuming you really have the same switch, there are
several different ones that look nearly identical).
Connect ground (black) to pin 1,
slow speed (red/light green according to Dan's diagram) to pin 4,
high speed (brown/light green " " ) to pin 8.
Leave the others open.
The full switch logic is:
Off: 1 to 6 to 7
Low: 1 to 4 to 6 to 7
High: 1 to 4 to 7 to 8
> don't know the
> terminal layout but one suggestion is the lucas 39156
> (54033632) which is a
> two-terminal light switch from a Stag.
Took me awhile to find that one, it's only for a RHD, Mk II Stag. It's also
kind of big, about 1.75" in diameter, and has five tabs (though two sets of
two are parallel, so only 3 contacts). Wire it the same as above, the
numbers 1, 4, 8 are molded into the back of the switch.
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|