Randall mentioned the concern of taking two pipes all the way back which was my
concern too, (tr-3) going through the central frame box section. Upon closer
inspection I see that I have a 4" by 2 1/4" hole through the central box
section
but it looks like it was cut larger by a prior owner. (Probably not the best
thing for strength). Soooo maybe two 1 1/2 inch pipes would go through side by
side. However solving the frame rattle would be more of a battle.
It also appears there's a smaller hole beside the large one at least on the
back
section of the "box". I'm forgetting what might run through that section.
Anyway.................i'm guessing that my box section is no longer stock
considering it looks cut up.
I think i'll go with one muffler for each pipe and then can add later if its
too
noisy.
thanks again to the list
gary n.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|