In a message dated 3/4/2011 10:45:27 PM Central Standard Time,
nafzigerg at yahoo.com writes:
> I'm wondering about peoples experiences with cleaning out and coating
> inside gas
> tanks (tr-3). Looking inside I see there are two baffles, resulting in a
> separate area at each end. I have some rust in the seam as well as around
> the
> exit hole. I'm guessing that nothing much can be done about the area
> inside the
> baffled area. I'm also not sure what to use to knock the rust loose as
> I'm
> afraid that anything i use (bolts nuts ect) might get inside the baffled
> area
> and not be able to get it out.
>
I took mine to a radiator shop and had it prefessionally cleaned and
sealed. That cost me less than $100.
Dave
|