[TR] What do you use to clean greasy parts?

[darrellw at ipns.com (Darrell Walker)]

Hi Chris,

The system I used the last time was:

1.  Wipe as much as possible off with paper towels (lots of paper towels).
2.  Spray with Simple Green or citrus-based degreaser, wipe with more paper 
towels.  Be careful with aluminum parts, some of the degreasers will stain.  
Scrub with toothbrushes (small areas) or a kitchen brush.
3.  Wash in hot/warm, soapy water.  If you don't have a sink for this, get a 
plastic tub.  If the part is prone to rust, wipe some clean oil on it after 
drying.

-Darrell

-- 
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA