triumphs
[Top] [All Lists]

[TR] TR6 Pedal Box assembly

Subject: [TR] TR6 Pedal Box assembly
From: jerryvv at roadrunner.com (Jerry Van Vlack)
Date: Wed, 2 Feb 2011 19:33:20 -0500
I'm re-assembling a TR6 Brake and Clutch Pedal Box and I didn't write down how 
the return springs attach and where they attach. On the Brake side there is a 
flange bent up from the box with a hole in it between the pedal arm and where 
ever the other end of the spring attaches. Does the return spring go through 
this hole? It seems that's the only way it can assemble, I thought I'd ask. 
Also I have 1 long spring and 2 shorter springs. Again for the Brake Pedal it 
looks like the longer spring has one end obviously going to the pedal arm but 
does the other end hook around the edge of the pedal box. It's the only spring 
with one long end that can go thru the hole in the flange without interference. 
How do the other 2 springs then attach to the Clutch Pedal?

Can someone stand on their head and take a photo under the dash of how the 
springs attach? That may be the easiest at this point. 

Thanks,

JVV

<Prev in Thread] Current Thread [Next in Thread>