On Sunday, January 16, 2011 10:00:37 am Dave Connitt wrote:
> Hi List,
> I have been looking for replacements for my lower fender attachment clips
> on my TR4A. This is the little dogleged metal tab where one end slips into
> a slot in the lower sill and there is a tapped hole in the other end that
> holds the bottom of the fender against the sill. I think I need all 6 of
> them. I could probably make them if I had a picture on one or even better
> a drawing. I checked the Moss and TRF websites with no luck unless I
> missed them. 63 days till Spring,
> Dave Connitt
> '67 TR4A IRS
> http://home.fuse.net/davestr4a
>
>
>
Dave,
Those are just speed nuts for a 1/4 inch Acme bolts. Same part is used for the
4, 4A, 250 and 6 fenders.
If you have one for the rear fender of your 4, just take it to Lowes or any
hardware store and they should have them.
Bob
|