I use Permatex aviation form-a-gasket on both sides of those paper gaskets
and never have experienced any problems.
Joe
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Darrell Walker
Sent: Wednesday, January 12, 2011 9:14 PM
To: list Triumph
Subject: [TR] Proper gasket installation
What is the proper/recommended procedure for installing various gaskets? In
particular, I'm reinstalling my thermostat cover and water pump. These
gaskets are like thin kraft paper, and obviously are contact with
water/coolant. The other gasket I'm installing is the timing chain cover
gasket. This is a much thicker, heavy black material, and of course
contacts oil. Should they have any kind of dressing? If so, what kind?
Applied to both sides?
Thanks!
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
_______________________________________________
Triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Manage your account:
http://autox.team.net/mailman/options/triumphs/spitlist at cox.net
|