Thanks for those that responded to the end float question. The book says to
check the end float as soon as you get the front cam bearing bolted on which
confused the whole issue because the cam can be moved forward and back a
liberal
amount. Thanks also to the suggestion to check the oil opening on the rear cam
bearing which goes to the valve train.
thanks again!
gary n.
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|