Hi Listers,
If on a TR clutch throwbout fork you are going to install a grade 8
bolt in addition to the hardened pin would the best position for the
bolt be under the opposite fork from the side with the hardended pin?
The photo below shows a bolt dead center - just seems might be better
under the fork like the other side that is pinned..
Any thoughts on best position of grade 8 bolt?
Regards,
Carl
'63 TR4 since '74
I agree -- can't hurt to add the bolt. Sometimes you're glad to have
both a belt and braces.
A photo, just because it's out there:
http://members.cybertrails.com/~ahwahnee/cross%20bolt.JPG
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
